Antec Basiq BP430 User Manual download pdf (Page 2)

Antec Basiq User’s Manual

ATX12V version 2.2 power supply

Model BP430

Antec Basiq series power supplies are built to be compatible with the ATX12V

version 2.2 specification. They include two 12V output circuits that deliver safer

and more reliable output to your system’s components. In addition we’ve

included a variety of protective circuitry: OCP (Over Current Protection),

OVP (Over Voltage Protection), and SCP (Short Circuit Protection).

BP430 includes Universal Input with Active Power Factor Correction (PFC).

Universal Input allows you to connect your Antec Basic power supply to any AC

power outlet between 100~240V without having to worry about setting a voltage

switch. Active PFC improves the power factor value to the power supply by altering

the input current wave shape, helping the power plant provide power to users

more efficiently.

Power Switch:

This power supply comes with a main power switch. Make sure you turn the

switch to the ON ( I ) position before you boot up your computer for the first time.

In normal operation there is no need to turn the switch to the OFF (O) position

since the power supply is equipped with a soft on/off feature which turns your

computer on and off through the soft switch on your computer case. You may

need to turn the switch to the OFF position occasionally should your computer

crash and you cannot shut it down through use of the soft switch.

Installation:

1. Turn off the hard power switch on your old power supply if any.

2. Open your computer case. Follow the directions provided in your case manual.

3. Disconnect all power connectors from the motherboard and from the peripheral

devices such as case fans, hard drives, optical drives, floppy drives, etc.

4. Disconnect the power cord from your old power supply.

5. Remove the existing power supply from your computer case and replace it

with your new Antec power supply. (Illustration 1)

6. Turn the hard switch on the Antec power supply to the OFF (O) position and

connect the AC power cord to the power supply.

1 2 3 4

No comments

Antec Basiq BP430 User Manual Page 2