Antec Fusion Remote Max (No PSU) User Manual

Fusion Remote MaxUser’s ManualManuel de l’utilisateurAnwenderhandbuchManuale per l’operatoreManual del usuarioপᡅ䂀ᯢ᳌TMMedia ComponentsЁ᭛Փ⫼᠟ݞ

9RM2001. Application Exit: Close the active window or close iMEDIAN HD [ALT + F4]2. Power: Turn the PC on/off (Power switch also located on the intern

Antec, Inc.47900 Fremont Blvd.Fremont, CA 94538USAtel: 510-770-1200fax: 510-770-1288Antec Europe B.V.Stuttgartstraat 123047 AS RotterdamThe Netherland

1At Antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly

21. Lay the case down, with the top open.2. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’

3the 10-pin connector to the motherboard headers so that the blocked pin fits over the missing header pin. Note: Please check the motherboard manual f

4Pin Assignment for Audio Ports (HDA and AC’97)Pin Signal Names (HDA)Pin Signal Names (AC’97)1 MIC2 L 1 MIC In 2 AGND 2 GND3 MIC2 R 3 MIC Power 4 AVC

5 c. Navigating iMEDIAN HDUse the 4-way buttons to navigate iMEDIAN HD. Holding the left and right buttons will take you to the “Home” and “Menu”

63. Find a 4-pin molex or SATA connector on the power supply and connect it to the power connector on the device.The Cable ManagementThere is a cable

7Note: The minimum voltage to start the fan is 5V. We recommend our users to set the fan speed to High if you choose to connect the fan to a fan contr

8The Washable Air filtersThere are two filters located behind the front bezel door.1. Flip down the front bezel door. 2. Push to release one of