Antec GX300 Window User Manual download pdf (Page 15)

Use the grommet-lined cable routing holes to route PSU cables.

The yellow circle shows a cable tiedown.

2.5 Cable Management

There is a cable management compartment between the

motherboard and right side panel, as well as cable tiedowns

located on the back of the motherboard panel. You can tuck

excess cables in this compartment or route them to the drive

bays.

Choose the cables you would like to pass through the holes

behind the motherboard tray. Pull them through the hole

toward the right side of the case.

Use the zip ties provided to hold your cables in place. Zip ties

can be anchored to tiedown locations located on the back

of the motherboard panel.

For cables which will be routed back to front drives or other internal accessories, feed the cables back

through the insertion point nearest the destination of the cable. Connect the cable and then pull the

slack back to the right side of the case.

For cables which will be routed directly to front drives or other internal accessories, cable tiedowns are

located along the drive cage. Bundle front drives’ or other internal accessories’ cables together and

secure them using tiedowns.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Antec GX300 Window User Manual Page 15